Consumer Lawnmower Service


For Push & Self Propelled Models

  • Inspect for fluid leaks.
  • Change oil and oil filter (if applicable)
  • Inspect and change air filter and clean housing
  • Clean engine cooling screen
  • Inspect fuel system and tank, change fuel filter, remove carburetor bowl and inspect for water and dirt, inspect fuel lines for dryness and rot and replace broken fuel line clamps.
  • Replace spark plug and inspect spark plug boot and connections
  • Clean under belt cover (self-propel)
  • Lube height adjusters and transmission
  • Inspect recoil rope
  • Adjust RPMs within spec
  • Check and adjust throttle and choke settings
  • Check blade brake cable adjustment
  • Inspect Operator Presence Control
  • Remove and sharpen/replace blades as needed
  • Inspect condition of guards, shields and chute
  • Check machine over for loose or missing hardware
  • Grease machine as needed (controls, cables and linkages)
  • Final Inspection: Test run machine. Check safety features. Recheck fluids. Wash and clean.